Air Compressor Supplier in Riyadh
Riyadh is where Namerah Industrial Co. is built: our factory on Street 41 designs, assembles, tests and ships every screw compressor, piston compressor, air receiver tank, refrigerated air dryer we sell — and it is the single dispatch point for delivery, installation and maintenance across every city in Saudi Arabia.
Rotary Screw Compressors for Saudi Arabia Operations
Riyadh's buyer mix is the widest in the Kingdom: automotive workshops and tire shops in Sulay, paint booths and metal fabrication along Al-Kharj Road, food and beverage plants near Exit 18, and general contractors across the city. That range is exactly why we build both product families rather than one. A single-shift workshop running a spray gun, a tire changer or a couple of pneumatic tools is usually best served by a 3–10 HP piston compressor and a modestly sized tank — lower upfront cost, simple single-phase or light three-phase power, and a 1-year warranty that matches intermittent duty. A factory running multiple pneumatic lines, packaging machinery or continuous-process air demand should move to a 20–100 HP screw compressor: quieter, far more energy-efficient per m³ of air delivered over a full shift, and backed by our 3-year warranty because it is engineered for continuous running.
Because Riyadh sits inland at altitude with long, very hot summers, ambient heat is the main design factor we account for when specifying a package here: adequate room ventilation or a dedicated compressor enclosure, and where humidity or downstream instrumentation demands very dry air, a refrigerated or desiccant dryer sized to the compressor's actual output rather than its nameplate HP. On tank sizing, workshops with a few intermittent tools are usually well matched to a 100–500 L receiver, while a factory running a 50 HP screw compressor (37 kW, 6.0 m³/min, ~212 CFM at 10 bar) drawing continuously typically needs 1,000 L or more to buffer demand spikes and reduce compressor cycling.
Because the factory is here, Riyadh customers get the shortest path from order to commissioning: our own technicians handle delivery, installation and start-up on-site, and the same team returns for scheduled maintenance and breakdown callouts — the same Saudi-wide service that we dispatch from Riyadh to every other city in the Kingdom. When you send an enquiry, tell us the industry and duty cycle (single shift or continuous), the number and type of pneumatic tools or machines to be run simultaneously, the site's available electrical supply, and whether the unit will sit indoors or in an open yard — that is enough for us to recommend screw vs. piston, the right HP, and the matching tank and dryer.
Choosing Compressed-Air Equipment for Riyadh
Industries we serve in Riyadh
- Automotive workshops & tire shops
- Paint booths & auto body
- Metal fabrication (Al-Kharj Road)
- Food & beverage plants
- Construction & contracting
- Furniture & woodworking
Frequently asked questions
Is Riyadh where Namerah's compressors are actually made?
Yes. Our Street 41 factory in Riyadh is Namerah's only physical location — every screw compressor, piston compressor, tank, refrigerated air dryer we sell is built, tested and dispatched from there, to Riyadh and to every other city in Saudi Arabia.
Should a Riyadh workshop choose a screw or a piston compressor?
It depends on duty cycle, not just size. A single-shift workshop with a few intermittent tools is usually well served by a 2–20 HP piston compressor. A factory or workshop running continuous or multi-shift air demand should choose a 20–100 HP screw compressor for lower running cost and quieter operation. Tell us your tools and shift pattern and we'll recommend the right one.
How does Riyadh's climate affect the compressor package I need?
Central Saudi Arabia's high ambient temperatures mean ventilation or a dedicated enclosure around the compressor matters as much as the unit itself, and where downstream tools or instrumentation need dry air, a correctly sized refrigerated or desiccant dryer should be added to the package.
What tank size does a 50 HP screw compressor need in Riyadh?
A 50 HP screw compressor (37 kW, 6.0 m³/min, ~212 CFM at 10 bar) running continuously typically pairs with an air receiver tank of 1,000 L or more, sized to your actual demand pattern rather than a fixed rule — send us your simultaneous tool or machine load and we'll size it.
What does installation and maintenance from the Riyadh factory cover?
Our own team delivers, installs and commissions the unit on-site, then returns for scheduled maintenance and breakdown callouts. This is the same Saudi-wide installation and maintenance service dispatched from Riyadh to every city in the Kingdom.